Export configuration control
- 371HP reference options with matched driveline
- LHD / RHD aligned to destination
- Emission & compliance matched to import requirement
R Trucks / Configuration overview
HOWO NX 371 6x4 tractor head
You get configuration-matched export quotation for HOWO NX tractor head / HOWO NX tractor truck, aligned to your route, trailer type, emission standard, and destination port.
- Configurations: 6×4 reference · 371HP reference
- Incoterms: EXW / FOB / CIF · CKD / SKD optional
- Support: Spare parts supply + documentation guidance
HOWO NX 371 reference configuration
The HOWO NX 371 6x4 tractor head is a trailer prime mover with a 371 hp WD615.47 reference engine. Compare the exact engine, gearbox, axle and cab specification rather than selecting from the NX name alone.
The supplier reference uses HW19710, HF9 front axle, AC13 single-reduction rear axles with a 4.7 ratio, a 600 L fuel tank and H77L cab. Left- and right-hand-drive sheets are separate; the written offer must identify the selected build.
Check the NX component list before ordering
The tables below describe the 371 hp reference. Other NX variants need separate documentation. Match the engine, gearbox and axle identification plates to the offered truck, and confirm its frame, brakes, coupling and dimensions.
Supplier material contains conflicting overall lengths, so length must be measured or documented for the actual chassis. The reference sheet is not proof of current stock or the specification of a photograph.
Compare classic HOWO 371 tipper and tractor builds · Compare HOWO 371, NX and TX
FACTORY STRENGTH
Inspection and pre-shipment process
- VIN / chassis verification and key assembly checks
- Engine bay, cab interior, tires & fifth wheel confirmation
- Export packing and loading verification
Export documentation readiness
- PI / packing list / invoice alignment
- BL & shipment information coordination
- Destination compliance notes (as applicable)
Parts support and after-sales logic
- Engine / filters / belts / cooling & wear parts planning
- Fast-moving chassis items aligned to route condition
- Dealer resale: standardized spec = easier support
PRICE EXPLANATION
Why HOWO NX Tractor Head Pricing Is Configuration-Based
An export quotation is not a fixed “one price”. Your final price is calculated after matching engine option, drive type, cab/steering, emission, and destination Incoterms to your operation.
What drives the price
- Engine option: 371HP vs 420HP changes driveline matching and cost structure
- Drive type: 4×2 vs 6×4 changes axle set, traction capacity, and weight
- Cab & steering: LHD/RHD and cab spec affect availability and build scope
- Emission level: Euro II/III/V impacts engine system and compliance cost
- Destination & Incoterms: EXW/FOB/CIF changes export scope and landed cost
Why “lowest price only” requests fail
Without route and destination details, any number is only a reference and cannot be executed. Buyers usually lose time on re-quotations once configuration and CIF scope are clarified.
Best practice:
Specify destination port + GCW range + route profile first.
How to get an executable quotation
If you provide the 5 inputs below, you receive a matched configuration recommendation and an executable EXW / FOB / CIF quotation.
1 Destination country + port (for CIF)
2 Trailer type + typical GCW range
3 Route profile (flat / hills) + temperature
4 4×2 or 6×4 preference + LHD/RHD
5 Emission requirement (Euro II/III/V as applicable)
SHIPPING & EXPORT
Shipping, Packing & Export Delivery Process
Delivery time and shipping method depend on configuration, quantity, and destination port. Below is the standard export workflow for HOWO NX tractor head orders.
1
Confirm configuration & Incoterms
Confirm engine option (371/420), drive type, steering (LHD/RHD), emission, tires and destination scope (EXW/FOB/CIF).
2
Issue PI & payment schedule
PI confirms build scope and delivery terms. Payment schedule follows agreed trade terms (project/fleet/dealer).
3
Production / preparation & inspection
Vehicles are prepared to the confirmed export configuration. Photo/video confirmation can be provided before loading.
4
Export packing & loading
Choose shipping method (RoRo / container / flat rack) based on quantity and destination. Loading is verified.
5
Shipping & arrival support
For CIF, sea freight and insurance are arranged to your destination port. Shipment information is shared for clearance planning.
FAQ
Procurement FAQ — HOWO NX Tractor Head (Export)
These questions cover the most common buyer concerns before submitting a quotation request for howo nx tractor head / howo nx tractor truck.
Can you provide the lowest price without confirming configuration?
Export pricing is configuration-based. Engine option (371/420), drive type (4×2/6×4), steering (LHD/RHD),
emission standard, and destination Incoterms directly affect cost. A “lowest price only” request produces
a non-executable reference. Send destination port + typical GCW + route profile to receive an executable quote.
Which should you choose: 371HP or 420HP?
Choose 371HP for stable highways and controlled loads where fuel efficiency and purchase cost matter.
Choose 420HP for higher GCW, frequent gradients, hot climates, or mixed roads where reserve power
protects drivetrain life and uptime.
Do you supply 4×2 and 6×4 versions?
Yes. 4×2 is typically used for lighter duty and better fuel economy on stable highways.
6×4 is recommended for heavier GCW, traction demand, and variable road conditions.
Final recommendation depends on trailer type and route profile.
Can you supply LHD and RHD?
Yes. Steering is matched to the destination market. Confirm your country and regulation early because
steering affects availability, build scope, and delivery planning.
What emission standards are available for export?
Emission is market-dependent. Common export options include Euro II / Euro III / Euro V
depending on destination requirements and engine system. Confirm import requirements to avoid clearance risk.
What is the minimum order quantity (MOQ)?
MOQ depends on configuration and destination. For dealer trial orders, small quantities may be supported.
Fleet and project orders usually benefit from standardized configurations to reduce parts and service complexity.
What is the lead time and how is shipping arranged?
Lead time depends on configuration and availability. Shipping method is selected by quantity and destination:
RoRo for efficiency, container for mixed cargo planning, or flat rack
for special constraints. Provide destination port and quantity for a workable plan.
How do you support spare parts and after-sales planning?
You can request a recommended spare parts list based on engine option and operating conditions.
Standardized configurations simplify parts planning for fleets and improve resale readiness for dealers.
Export Quotation
Get a Configuration-Matched Export Quotation for
Get a Configuration-Matched Export Quotation for
HOWO NX Tractor Head
Export pricing is calculated after matching engine option (371HP reference), drivetrain (6×4 reference), steering (LHD / RHD), emission level, and destination Incoterms to your route and trailer type.
- Matched configuration recommendation based on GCW, route and climate
- Clear quotation scope by EXW / FOB / CIF
- Engine decision support (371HP vs 420HP)
- Shipping & delivery guidance (RoRo / container / flat rack)
- Export document readiness for smooth execution
- Spare parts planning aligned with your operating conditions
Executable
Quotation is usable, not reference pricing
Matched
Spec aligned with route & payload
Export-Ready
Document & delivery guidance included
Tip:
Include destination port, trailer type, typical GCW, and route condition
to avoid re-quotation and delays.
R Trucks HOWO Price Guide · 2026 Updated
Fields marked with * help filter and send the correct version.
By submitting, you agree to receive the price list and quotation by email/WhatsApp. Your contact details are used only for quotation and export service.
R Trucks reference configuration
The catalogue above includes configuration variants. The tables below are references for comparing offers. Confirm the actual engine, gearbox, axles, dimensions, equipment and steering side in writing, and match the inspection record to the truck supplied.
| Engine | SINOTRUK WD615.47 · 371 hp |
|---|---|
| Drive | 6x4 |
| Gearbox | HW19710 · 10-speed manual |
| Rear axles | AC13 single reduction · ratio 4.7 |
| Fuel tank | 600 L |
| Model | Confirm exact chassis model against the offer |
|---|---|
| Driver position | Left- or right-hand drive |
| Engine | SINOTRUK WD615.47, 371 hp, Euro II |
| Gearbox | SINOTRUK HW19710 manual, 10 forward / 2 reverse |
| Front axle | HF9 |
| Rear axles | AC13 single reduction rear axles, ratio 4.7 |
| Frame | Confirm frame dimensions and reinforcement in the quotation |
| Suspension | Confirm spring specification for the offered chassis |
| Tyres | 12R22.5, mixed tread, 18PR |
| Fuel tank | 600 L |
| Fifth wheel | 50# (2 in) |
| ABS | Confirm braking equipment and destination requirements |
| Cab | HOWO NX cab with sleeper, heating and air conditioning, air-suspended driver seat, MP3 |
| Equipment | High bumper, reversing buzzer, aluminium air tanks, fire extinguisher |
Configuration details and checks
The NX cab identifies a truck series, rather than one fixed chassis specification. R Trucks' 371 hp build uses the WD615.47 engine, HW19710 gearbox, HF9 front axle and AC13 single-reduction rear axles, ratio 4.7, in the supplier reference.
| Coupling | The listed build has a 50# fifth wheel. Confirm the trailer kingpin and loaded coupling height before ordering. |
|---|---|
| Fuel storage | The listed 600 L tank supplies the diesel engine; it is separate from any tank carried on a semi-trailer. |
| Frame and brakes | Confirm the actual frame and braking equipment in the written specification; do not infer them from a similar NX brochure. |
What to confirm before ordering
- Confirm left-hand or right-hand drive and the cab equipment list.
- Match the 4.7 reference axle ratio and the offered tyre specification to the intended route.
- Ask for a chassis drawing when matching an existing trailer.
Reference examples describe possible equipment, rather than current stock. The written quotation confirms the engine, chassis, body and included equipment for your order.